2,Good weak light and high temperature performance
3,Best ULVAC equipment
Minimum Order Quantity: 2.8 Kilowatt/Kilowatts
Supply Ability: 25 Milliwatt/Milliwatts per Year
Payment Terms: T/T,L/C at sightContact Supplier
Packaging Detail: Q'ty/20': 448pcs (44.8kw) Q'ty/40': 960pcs (96kw)
Delivery Detail: 5-10 days
AmpleSun ASF series have many advantages with high quality production process and raw materials:
AmpleSun solar module sells well in Australia, Europe, South Africa, South and North America with following advantages:
1.Excellent performance under weak light and high temperature condition.
2.Good environment adaptability, less sensitive to installation angle, more suitable for vertical installation in BIPV.
3.30% lighter than double-glass.
4.Free from defects for 5 year with regular use, maintain more than 90% of Max. power for 10 years and 80% for 25 years.
5.Use best materials, avoid any risk in the whole life of our products.
6. Advanced encapsulation pross ensures a high resistance against UV, temperature and weather.
7.. Choose the best TCO glass from NSG.
8. Back Sheet from Toyo,Japan,super water resistance type (5 layers),longer life time.
9. Enable coverage with fewer units and lower system cost.
10.. Anodized aluminium frame resist high wind and snow loads.
11. Pre-installed cables ensuring quick and easy installation.
12. A back sheet with drainage holes eliminates the risk of water or snow accumulation inside.
13. Good looking, well match the buildings or as a constituent part.
1.Low temperature coefficient:
Normally, the electricity performance of photovoltaic module is measured by STC standard. Which include strong sunlight(1000 W sunlight per square meter,1.5 A solar spectrum distributing) and 250c solar cell temperature. However, the temperature of solar module, operating in the sun, can be higher than atmosphere temperature 280c. The temperature of solar module, which installed at the roof of building, can be even higher. It is not unusual for the temperature of solar module to achieve 550c. In this case, the temperature coefficient is a very important parameter due to various solar cell technology. The temperature coefficient is always minus. With the temperature increase, module power will decrease accordingly. Temperature coefficient for thin film silicon solar cell is -0.2%/0c, and that of crystalline solar cell is -0.5%/0c. That means, when the module is worked on 500c condition, compare to the efficiency reached on 250c test standard , thin film silicon solar module will loose around 5%, and the loss for crystalline will be around 12.5%.
In conclusion, even the STC efficiency of thin film silicon solar cell is low, the efficiency in actual operation condition is not far away to that of crystalline solar cell.
2. Good weak light performance:
The performance of thin film silicon solar cell is better than that of crystalline solar cell in the weak light condition. Normally, installed module worked in a strong light of 1000 watt per square meter is very few. Ideally, output power of solar module should be the direct portion of the intensity of sunlight.
And thin film silicon solar cell has such characteristic, however crystalline don’t. With a situation of sunlight of 200 watt per square meter, output power of crystalline solar module is around 85% of it should be. That means solar power system with crystalline solar module will not generate power in the late afternoon. However, solar power system with thin film silicon solar cell still generates power.
Furthermore, thin film silicon has gentle current-voltage curve. This characteristic makes it easier to pick-up the most electricity power.