Electrical Supplies
Electrical Supplies Business Opportunities &  Manufacturers B2B

Buy Lead: 3.7V 1700 camera battery for Canon (See details)

Hello I just need one of these batteries >> More queries...

Posted By: Jason Skelton on January 20, 2019 43:24 From 64.180.71.***Inquiry Related Cateogry: Rechargeable Batteries

Suppliers can follow up instruction to get this buyer's email address and other contact information.

Inquering Related Product: 3.7V 1700 camera battery for Canon - AEC883650

Quick Brief

Place of Origin: Guangdong China (Mainland)Brand Name: AECModel Number: AEC883650
Type: Li-polymerNominal Voltage: 3.7VSize: 8.8*36.0*50.0mm
Nominal Capacity: 1700mAhPrice: FOB HK, FOB SZDelivery: Air Express
Min Order: 1000pcsSupply Ability: 100000pcs per dayPay terms: T/T, Paypal, Western Union
Circle life: Supper long, >500 cyclesWarranty: 12monthsCertification: CE, UL, UN38.3, CB,PSE,CTIA,ROHS...
Performance: reliability, safeEnvironmental protection: Environmental 

Product Features:

3.7V 1700mAh camera battery for Canon

1.AEC883650, 1700mAh

2. Size: 8.8*36.0*50.0mm

3.Certification:CE, UL, UN38.3, CB,PSE

Product Cateogry: Rechargeable Batteries

Business Term:

Port: Hongkong, Shenzhen

Minimum Order Quantity: 1000 Unit/Units

Supply Ability: 100000 Unit/Units per Day

Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,paypal

 
Contact Supplier
3.7V 1700 camera battery for Canon

Packaging Information

 

Specifications and Product Details:

Original Product Page

Specificationcamera battery for Canon
TypeLithium-ion polymer rechargeable cell
ModelAEC883650
Nominal voltage3.7V
Nominal capacity1700mAh
discharge from 4.2V to3.0V at 0.2C mA
Minimal capacity1700mAh
Max charge current1700 mA 1C
Charging methodcharge with constant current 1C to 4.2V, then charge with constant voltage 4.2V till charge current is less than 0.01C
Max discharge current1700 mA 1C
Discharge cut-off voltage3.0 V, the over-discharge detection voltage of PCM
Operating environmentCharging, 0°C ~ 45°C ; 65±20%RH
Discharging, -20°C~60°C ; 65±20%RH
Storage environment-20°C~45°C
65±20%RH
storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH;3.7~3.9V
Cell Weight (Approx)15.0 g
Cell Dimension (Max)Thickness × Width × Length (mm)
8.8 × 36.0 ×50.0mm

Electrical characteristics
Full chargecharge with constant current 1C to 4.2V, then charge with constant voltage 4.2V, till charge current is less than 0.01C
Initial capacity >1700mAhThe capacity means the discharge capacity of the cell that was discharged to 3.0V with discharge current of 0.2C within one hour after the full charge.
Cycle lifeCycle life is the capacity of the cell that was repeated 300 cycles with full charge and then discharging to 3.0V with discharge current of 1C.
Initial impedance < 80 mΩCell resistance was measured at AC 1KHz after 50% charge and the test temperature was 25°C.

ChargingCharging current and charging voltage should be less than specified in the Product Specification.
The charger shall be designed to comply with Product Specification.
It is dangerous that charging with higher curren or voltage than Product Specification may cause damage to the cell electrical,mechanical safety performance.
warrantyPeriod of warranty: 12 months after sales
Range of warranty: There is low voltage, expansion or leakage with the correct use of the
cell in the period of warranty.
IdentificationWarnings would better be marked on the surface of the battery which is tied up by certain
cells
*Using the charger designated by the manufacture(AEC).
*Don't throw the battery in fire or heat it.
*Don't short-circuit.
*Don't unpack the battery or change its structure.
Pack design* Battery pack should have sufficient strength and battery should be protected from mechanical shock
* No cell movement in the battery pack should be allowed.
* No Sharp edge components should be inside the pack containing the battery.
Warnings1.Don't throw the cell in fire or heat it or store it in high temperature place.
2.Don't fix the positive and negative of the cell reversely to the electrical equipment.
3.Don't connect the positive and negative polarities by metallic conductor such as a metallic wire.
4.Don't stab it with a needle,beating,treading or other way.
5.Keep the cell sealed.
6.Don't unpack the battery or change its structure.


 
Contact Supplier
Related Queries